Electromagnetic field measurement and reduction
Un esprit sain dans un environnement sain !Take measurements, take measures: look after your health.
Champs électromagnétiques, défi du 21ᵉ siècle
Your electromagnetic environment measured, analysed and managed, in Toulouse and throughout France.
Radio waves on the rise
IoT connections are set to rise from 22.3 billion in 2025 to 47.1 billion in 2031 (Ericsson), multiplying the radio-frequency sources in buildings. On mobile networks, ANFR lists more than 56,300 authorised 5G sites in France as at 1 October 2026 (source: ANFR). In France, ANFR monitors public exposure: the median value measured in 2024 is 0.48 V/m, well below the regulatory limit values (28 to 87 V/m depending on the frequency). The actual level in a given place can only be known by measurement.
Electric fields all around us
General electrical work
Our qualified electricians can meet all your electrical needs, whether for conventional installations or for installations designed to limit electric and magnetic fields.
Reasons to act!
Everyday sources of exposure
Constant exposure
Connected devices (routers, phones, speakers, sensors) add radio-frequency sources to buildings. Electrical installations, for their part, give rise to electric and magnetic fields at 50 Hz, the level of which depends on the wiring, the earthing and the appliances that are plugged in. Only an on-site measurement can establish these levels.
A scientific debate that remains open
According to the authors of the BioInitiative report (an international group of researchers and physicians, 2007, updated in 2012), biological effects have been reported at levels below current limits. The scientific debate remains open.
The International Agency for Research on Cancer (IARC, an agency of the WHO) classified extremely low-frequency magnetic fields in 2002, and radio frequencies in 2011, as “possibly carcinogenic to humans” (Group 2B, limited evidence); electric fields of the same frequency fall under Group 3 (not classifiable) (Monograph 80, 2002; Monograph 102, 2011 classification published in 2013). ANSES is continuing its work. As a precaution, we limit unnecessary exposure.Monographie 80, 2002 ; Monographie 102, classement de 2011 publié en 2013). L’Anses poursuit ses travaux. Par principe de précaution, nous limitons les expositions inutiles.
Reference levels
For the general public, the regulatory limit values for radio frequencies are between 28 and 87 V/m depending on the frequency; at 50 Hz, the reference levels in recommendation 1999/519/EC are 5 kV/m (electric field) and 100 µT (magnetic field).
Our approach: measure, then propose actions to reduce the measured levels (ALARA principle).
Google reviews
After the measurement, we propose and carry out the electrical modifications that are needed.
Our 3-step approach
This approach is inspired by the ALARA principle (“as low as reasonably achievable”): measure, then reduce the measured levels where it is technically possible.
Mesure
We measure electromagnetic fields on site, both high and low frequencies. Each reading is recorded in a written report.
Advice
We give you a measurement report and technical recommendations tailored to your installation, so you know where to act first.
Solutions
Nous réalisons les modifications électriques retenues (mise à la terre, câblage, coupure de circuits) afin de réduire les niveaux mesurés.
Comprehensive expertise
For the safety of your electrical installation and the measurement of its fields
Our expertise combines measurement, advice and tailored technical solutions to limit, as a precaution, unnecessary exposure to fields.
We help individuals and businesses get a clear picture of their electrics and radio waves, from measurement to solution.
Our expertise at your service
For private individuals
We carry out a survey of your home to identify the sources of electric, magnetic and radio-frequency fields. We then propose tailored technical solutions. A concrete example: where to place the router and Wi-Fi in a home.
For businesses
We measure the electromagnetic fields in your workplaces and propose technical actions to reduce the measured levels. Our method is set out in the article: measuring an open-plan office before taking action.
For the medical sector
We measure the electric, magnetic and radio-frequency fields in your practice or premises, and propose technical actions to reduce the measured levels. Our services consist of measurement and electrical engineering.
Tell us about your project
Contact us!
Your information is used solely to process your request and is kept for 3 years. To access, amend or delete it: contact@chrysaliide.com. En savoir plus :
privacy policy.
